Skip to main content

Travelling on Spirit airlines out of Boston Logan airport? Here are some tips.

I attended CES 2017 in Las Vegas. Booking the trip late I ended up on Spirit airlines. It was both non-stop, making it six hours to Las Vegas from Boston, and affordable, less than $300 for a one way trip compared to around $700 with JetBlue.

Here are some tips that might help you when travelling on Spirit from Boston Logan airport.

Eat

Spirit is located in the B-terminal, gates B-37 and 38, with its own TSA security checkpoint. While it does have restrooms and places to sit the food selection is limited to a single food stand. I'd recommend eating at the Legal C Bar (number 77 in the image below) prior to going through the terminal security checkpoint. The food and service there were great.

Drink

The water and other drinks are cheaper if you buy them at the food cart rather than on the flight.

Seats

The seats on Spirit don't recline. They do this to reduce weight, seat cost, seat maintenance costs, and so seats don't impact the free space of other passengers, letting them fit more seats into the plane. After the six hour flight my opinion is that the lack of reclining seats isn't really that bad.

Impression

Overall my impression of Spirit is that while they are a budget airline the service and flight were smooth and on time. They also offer in-flight food and beverages at pretty reasonable prices, $17 for 3 beers, wines or shots.

Comments

Post a Comment

Popular posts from this blog

Debugging an imprecise bus access fault on a Cortex-M3

This information may apply to other cortex series processors but is written from practical experience with the Cortex-M3. Imprecise bus access faults are ambiguous, as noted by the term "imprecise". Compared to precise bus errors, imprecise errors are much trickier to debug and especially so without a deep understanding of arm processors and assembly language. Imprecise and precise flags are found in the BusFault status register, a byte in the CFSR (Configurable Fault Status Register). BusFault status register bits The definition for imprecise and precise bits is: [2] IMPRECISERR Imprecise data bus error: 0 = no imprecise data bus error 1 = a data bus error has occurred, but the return address in the stack frame is not related to the instruction that caused the error. When the processor sets this bit to 1, it does not write a fault address to the BFAR. This is an asynchronous fault. Therefore, if it is detected when the priority of the current pr...
5 comments
Read more

UTM (qemu on OSX) only boots into uefi shell after installing Ubuntu 22.10 (solved!)

I've been meaning to try out running Linux and Windows virtual machines on my x86 MacBook Pro using qemu . I've been using Parallels for several years. Parallels is a nice application and works well but I'm always getting bugged to purchase upgrades. Parallels provides free updates on minor version upgrades only, say 13.0 to 13.1. With so many prompts to purchase upgrades it feels like Parallels could release a bit more minor versions and a bit fewer major versions. Rather than just purchase an upgrade to Parallels I figured I'd try out qemu via the UTM application . UTM wraps qemu with a helpful gui and comes as a packages Mac application. And UTM supports both x86 and M1 systems (as qemu also supports these systems). Creating an Ubuntu VM with UTM didn't go as smoothly as with VirtualBox or Parallels but it was the settings I chose that messed me up. Here are two things I ran into when installing Ubuntu on UTM. #1. Configure the qemu instance to use a 'Display...
Post a Comment
Read more