Skip to main content

Garden 2.0

We had a garden a few years ago but didn't keep it up in 2014 or 2015. We moved to North Reading, MA in March and I finally made some time to setup a new garden. It's great having fresh home grown vegetables and I'm excited to get started growing them.

With the help of my assistant it took about two hours to cut the wood sides of the garden box, set them up, level them, stake them, and fill the box with soil.

It's a bit late in the season to plant but at the least the garden box is ready for next year.

I planted some peas, beets, peppers, and basil and it seems likely we'll get some small amount of production this year.

Figuring out the garden dimensions, trimming boards and leveling them

Building some stakes to hold the pine boards in position.

My assistant taking a break after working hard

Some water and ice cubes to keep cool

Leveling the soil. Look at the cute little fence to keep the dogs out

Transplanted the Zucchini I started in a pot a week or so ago

Planted seeds and watered

An awesome map I created with a Google docs drawing so I can remember where things are.

I'm planning to post on how things turned out in a few months and include another picture from the same spot so you can see how things turned out.
Labels:

Comments

Post a Comment

Popular posts from this blog

Debugging an imprecise bus access fault on a Cortex-M3

This information may apply to other cortex series processors but is written from practical experience with the Cortex-M3. Imprecise bus access faults are ambiguous, as noted by the term "imprecise". Compared to precise bus errors, imprecise errors are much trickier to debug and especially so without a deep understanding of arm processors and assembly language. Imprecise and precise flags are found in the BusFault status register, a byte in the CFSR (Configurable Fault Status Register). BusFault status register bits The definition for imprecise and precise bits is: [2] IMPRECISERR Imprecise data bus error: 0 = no imprecise data bus error 1 = a data bus error has occurred, but the return address in the stack frame is not related to the instruction that caused the error. When the processor sets this bit to 1, it does not write a fault address to the BFAR. This is an asynchronous fault. Therefore, if it is detected when the priority of the current pr...
5 comments
Read more

Travelling on Spirit airlines out of Boston Logan airport? Here are some tips.

I attended CES 2017 in Las Vegas. Booking the trip late I ended up on Spirit airlines. It was both non-stop, making it six hours to Las Vegas from Boston, and affordable, less than $300 for a one way trip compared to around $700 with JetBlue. Here are some tips that might help you when travelling on Spirit from Boston Logan airport. Eat Spirit is located in the B-terminal, gates B-37 and 38, with its own TSA security checkpoint. While it does have restrooms and places to sit the food selection is limited to a single food stand. I'd recommend eating at the Legal C Bar (number 77 in the image below) prior to going through the terminal security checkpoint. The food and service there were great. Drink The water and other drinks are cheaper if you buy them at the food cart rather than on the flight. Seats The seats on Spirit don't recline. They do this to reduce weight, seat cost, seat maintenance costs, and so seats don't impact the free space of other passengers,...
3 comments
Read more

Yocto recipe SRC_URI for a BitBucket / GitHub ssh git repository

This is a particularly geeky post but because Google searches didn't turn up any information I thought it would be helpful to document the issue and solution for others. I was writing  Yocto recipes that pulled from BitBucket git repositories in ssh form and ran into several issues getting a SRC_URI that worked. GitHub uses the same syntax for their ssh repositories. A BitBucket / GitHub git url, in ssh form, looks like: < username >@bitbucket.org:< account name >/< repository name >.git a more concrete example for a git repository in one of my BitBucket accounts looks like: git@bitbucket.org:cmorgan/somerepository.git Yocto recipes can pull from git repositories by setting the SRC_URI variable appropriately. Unfortunately you can't just do: SRC_URI = "git@bitbucket.org:cmorgan/somerepository.git You'll get errors because the Yocto won't know what kind of url this is. You need to specify the protocol for Yocto to k...
2 comments
Read more